The resin driveway is a great option for anyone looking for a low-maintenance, long lasting and attractive surface. Resin driveways are less likely to crack than concrete and tarmac, but must still be well looked after. This article will explain how to look after your resin driveway and what must be done to keep it in the best condition. Care should be taken in the early days of the install to not expose the surface to any chemicals.
Looking after your Resin Driveway
After the resin driveway has been laid it is important to let your resin drive settle for a few weeks. During this time you should not have any vehicles or machinery on the resin drive as they will leave marks and cause damage, however normal pedestrian access is acceptable during this settling period. You may also need to wait slightly longer than usual if rain is expected.
Resin Driveway Maintenance Tips
After the resin driveway has settled, it is important to keep your resin drive looking great by avoiding parking vehicles on it too much. If you must park a car or other vehicle on the resin drive try to leave room for air flow beneath and around it so that moisture can escape (a gap of 25mm should be adequate).
Any water trapped under heavy items may cause damage to the resin surface as well as making unsightly marks which are difficult to remove. Parking vehicles over long periods of time will also reduce airflow underneath them causing damp patches in areas where they have been parked for extended periods of time, this can lead to potential problems with cracking if not protected against. It’s best practice though not to keep a vehicle on resin driveways for more than one night.
Shrewsbury Resin Driveway Cleaning Tips
In order to ensure that your resin surface is kept in the best possible condition it’s important that you clean it regularly. The resin driveway should be swept with a soft bristle brush and then rinsed off using water from a hose pipe or pressure washer, this will remove any dirt build up which can lead to staining if left untreated.
If you do get resin driveway stains they are fairly easy to remove by scrubbing them down with an acidic solution such as vinegar or citric acid diluted in water (a ratio of around two tablespoons of each per half bucketful), alternatively specialist cleaning products may also work well depending on the resin used.
Resin Driveway Coating Tips
Another way to protect resin driveways is by applying resin driveway coatings, these are available from resin drive contractors and specialist suppliers which can make your resin surface more durable as well as easier to clean. Resin coating will also help with staining problems if applied regularly over a period of time.
In order for the resin coating application to work properly it’s important that you use products compatible with your specific type of resin otherwise they may not adhere correctly or at all, this should be made clear during any consultations about installing a new resin driveway. Generally speaking though most types of resin can be coated successfully after around two weeks following installation when material has fully settled into place without any risk of damage or discolouration.
Resin driveway coatings will protect resin driveways from most stains and they offer a clear, durable surface which is easier to clean than resin alone when it comes time for regular maintenance. Resin coating can also make resin driveways more attractive as well as protecting them against the elements such as frost and snow in winter conditions (though not all types of resin are made to be used in extremely cold climates).
Generally speaking however most types of resin can be coated successfully between two and six weeks following installation when material has fully settled into place without any risk of damage or discolouration.
Additional Resin Driveway Repair Tips
There are a few different ways to go about resin driveway repair depending on what kind of problem you have but it’s important to be thorough in order for your resin resurfacing project to work properly.
As resin can crack fairly easily if exposed too much to extreme weather conditions such as heavy rain followed by strong frost then deeply penetrating cracks may require specialist attention from companies that offer resin repairs Shrewsbury help sort out these type of issues.
In the case of resin driveways that have been exposed to spilled chemicals such as antifreeze it’s a good idea to use a resin cleaning product in order remove any trace from your surface, this will prevent staining problems and is also easier than trying to clean off already dried or set stains which can be difficult if not impossible.
If you do get resin driveway cracks then sealing them with resin primer before resurfacing should help spread out weight evenly once repairs are finished though make sure that the area is completely dry before applying resin sealer otherwise trapping moisture under fresh coats could damage surfaces further down the line.
It’s important when repairing cracked areas on resin driveways however that you ensure there isn’t too much pressure being exerted from your resin resurfacing material as this can cause further damage to the surrounding areas if not done properly.
Your Shrewsbury Resin Driveway Company
SJH Group is the resin driveway Shrewsbury company to call for resin driveways and resin patios in all areas of Shropshire. Call our friendly team today to find out more about how we can transform your home’s exterior with a durable yet stylish resin driveway.
